Mojave Walk On Graphics

Mojave SPMWOG Walk-on Graphics – 54″ x 50 yds

$639.00

4.0 mil. Matte White or Clear Vinyl – Base Film
5.0 mil. Clear Embossed Rigid Vinyl – Overlaminate

Sold in kits of one roll of base film and one roll of overlaminate film.

In stock

Category: Tag: Brand:

Product Description

DESCRIPTION: Catalina Graphic Films’ Mojave Digital Media family of Floor Graphics include Walk-On Graphics floor decal system consist of a two component, UL-approved system with a base film and a slip-resistant overlaminate.
APPLICATION: Interior floor graphics applied to smooth flooring only. Application to textured and/or unfinished floor surfaces is not recommended.
WALK ON FLOOR SYSTEM SLIP RESISTANT UL-RATING: The base film components WOGFW and WOGFC, along with the Clear Embossed Rigid Vinyl overlaminate have all been tested as a system and are certified as compliant with UL 410 (“Slip Resistance of Floor Surface Materials”) and are listed in UL file IMET.SA11746.
PRINT METHODS: Screen print, solvent and UV flat bed ink jet, & offset. Offset material requires a top coat
MINIMUM SURFACE/AMBIENT AIR APPLICATION TEMPERATURE: +50º F. For lower application temperature requirements, ask your Catalina representative about our other adhesive recommendations
SERVICE TEMPERATURE RANGE: +50º F to +150º F
TOTAL PRODUCT THICKNESS: 10.0 ± 1.0 mils – Base film + Overlaminate
SOLVENT RESISTANCE: Good for most petroleum based solvents. Edge sealing is recommended in high solvent exposure areas
WATER RESISTANCE: Excellent
ADHESION: 25 ± 2oz/in. (180º adhesion from SS, 24 hour room temperature dwell)
BASE FILM & OVERLAMINATE SHELF LIFE: One (1) year when stored under conditions of 70º F and 50% relative humidity
INDEMNITY: The use of both the Catalina Walk-On Graphics base films and the Catalina Walk-On Graphics overlaminates are required for indemnification. Exchanging other base films or overlaminates will not carry an indemnity policy.