DESCRIPTION: Catalina Graphic Films’ Mojave Reflective Films are enhanced for use with Eco-Solvent, Solvent, UV and Latex-Based inkjet printers. SPMRF is a flexible, enclosed lens glass-bead retroreflective sheeting with removable adhesive. Conforms to all ASTM D 4956 requirements.
APPLICATION: Typical applications for this material are vehicle markings where application to riveted and corrugated surfaces may be required. It can also be used on commercial signs and various labels and is highly resistant against to extremes of hot, cold, dry and humid weathering conditions. Additional usage include permanent traffic signage, emblems and temporary traffic control devices. This type of sheeting conforms to ASTM D4956 TYPE I Specifications.
FACE FILM: 7.0 mil. White Reflective Vinyl
ADHESIVE: Gray Permanent
LINER: 78# Layflat
GLOSS LEVEL: High
OUTDOOR DURABILITY: Up to 5 Years
PRINTING METHODS: Digital printing with use of Eco-solvent and solvent inks and most screen printing inks.
MINIMUM SURFACE/AMBIENT AIR APPLICATION TEMPERATURE: Minimum 20º C.
APPLICATION SURFACE: Minimum application temperature for flat surfaces 15ºC, for corrugated and riveted surfaces 25ºC.
TYPICAL FILM CALIPER (W/ADHESIVE): .13mm
ELONGATION: > 120%
CHEMICAL RESISTANCE: Excellent.
WATER RESISTANCE: Excellent.
ADHESION: Permanent bonding will take place approximately 48 hours after application.
FINISH: Gloss meter >85 @ 60 degrees
SHELF LIFE: 12 months when properly stored under conditions of 70ºF and 50% humidity.